Below is a list of the lesson activities. The activity pages will be added as the course continues.
Lab 1.2: Testing connectivity
Chapter 1 Lab 1.3: Bits, bytes, binary and hex
Lab 1.4: IP address and subnet problems
Chapter 2 Lab 2.1: Create topology drawings
Lab 2.2: Map devices on topolgy drawings to OSI layers
Chapter 3 Lab 3.1: Identifying cables and connectors, add descriptions to network diagrams
Lab 3.2: Investigate UTP cables and produce wiremap drawings
Chapter 4 Lab 4.1: Create and test a crossover cable
Lab 4.2: Design and implement a PC to PC network connection
Chapter 5 Lab 5.1: Create and test a straight-through cable
Lab 5.2: Design and implement a hub based peer-peer network
Chapter 5 Lab 5.3: Create and test a rollover cable.
Lab 5.3: Connect to a router using hyperterminal
Lab 5.4: Design and implement a simple routed WAN
Chapter 6 Lab 6.1: Troubleshooting Ethernet collision errors
Lab .6.2: Exploring Ethernet frames using packet sniffing software
Chapter 7 Lab 7.1: ??
Chapter 8 Lab 8.1: Design and implement a switch based network
Lab 8.2: Troubleshooting duplex modes and autonegotioation
Chapter 9 Lab 9.1: Explore application layer protocols
Lab 9.2: Explore transport layer protocols
Lab 9.3: Explore internet layer protocols
Chapter 9 Lab 9.4: IP addresses, DNS and ARP
Lab 9.5: Setup a DHCP client
Chapter 11 Lab 11.1: Exploring transport layer flow controland handshaking
Lab 11.2: TCPand UDP ports
Site Home
Top
Unit Home
Unit Information
Assessment
Syllabus
Scheme of Work
Notes & Lessons
Assignments
Quizzes
Activities
Books & Things
Links